Formed Platform and Crossover Systems
Compatible with the Alternating Tread Stair and the Model 01AA/02AA stairs, this
platform is a single piece of metal, cut and formed to create the walking surface,
the kick plates, and the mounting plates for the stairs. Handrails bolt from underneath
the plate. This platform is ideal for crossover systems,
intermediate landings, exit landings, and equipment access platforms.
Formed Platform Design Details
Table 1: Formed Platform Design Details
Safety Yellow Powder Coat
Gray Primer Powder Coat
Iron Gray Powder Coat
Hot Dip Galvanized
Choice of Color Powder Coat
Natural Finish Only
The handrails are bent so that the rail of the platform conforms to the rail of
the stair. For this reason, we will ask the angle of the stair, if the platform
is to be used with an alternating tread stair.
Standard sizes are 24" x 24" to 24" x 120" in increments of 6"
Landings and Platforms:
- 24" x 38" Intermediate Landing
- 30" x 38" 90° Right/Left Turn Intermediate
- 30" x 60" 180° Right/Left Turn Switchback Intermediate
- 30" x 30" Right/Left Turn Exit Landing
- 38" x 38" Right/Left Turn Exit Landing
• 24" x 36" Work Platform
Custom sizes available upon request:
Typically, the limits are 54” wide and 144” long. , but our engineers can work on
a modified design or sections that bolt together to create larger platforms. Another
option for larger platforms is our
drop in panel platform .
Handrails are 42” above the landing, and the configuration depends on your application.
Handrails are provided on sides without stair mountings. The rails are the same
1-1/2” OD tubing as the rail of the stairs. Aluminum clamps are provided to connect
the stair handrail to the platform handrail.